VW-VF10BG
Specifications
Specifications
| Model number | VW-VF10BG | ||
| Power source | AC 220-240 V, 50-60Hz | ||
| Dimensions | mm | 790 (H) x 580 (W) x 297 (D) | |
| Weight | Product weight | kg | 33 |
| Operating weight | kg | 39 (when water supply tank is full) | |
| Exterior color (Munsell number) | Front panel: NW-K11 (VW white), Munsell value: N 8.5 Side panel: NW-K12 (VW gray), Munsell value: N 4.0 |
||
| Operation | Operating modes | High / Mid / Low | |
| Ambient usage temperature | 5-35C | ||
| Water to be used | Tap water (potable) *9 | ||
| Electrical characteristics |
Power consumption | W | High: 145, Mid: 78, Low: 57 |
| Current | A | High: 2.10, Mid: 1.20, Low: 0.88 | |
| Ventilating device |
Type and number | Sirocco fan, x 1 | |
| Rated airflow | m3/min | High: 10, Mid: 5, Low: 2 | |
| Motor output (no. of poles) |
W | 60 (8) | |
| Louver | Two louvers (with swing function, closing with power OFF) | ||
| Airflow direction adjustment range |
0-23 (airflow direction position memory) | ||
| Continuous operating time *11 |
Summer | hours | High: 7, Mid: 12, Low: 18 *12 |
| Winter | hours | High: 6, Mid: 10, Low: 15 *13 | |
| Disinfectant element | Stationary type | ||
| Water supply and drainage | Water supply tank (capacity approx. 6 liters), drainage tank (capacity approx. 2 liters) | ||
| Operating noise | dB (A) | High: 49, Mid: 35, Low: 29 *10 | |
Specifications with high-performance micro-particle filter mounted
| Model number | AFT-HVW10BG | |
| Particle trapping efficiency | % | Equivalent to 65% by colorimetric assay method (equivalent to 93% by gravimetric method) |
| Rated airflow | m3/min | High: 8, Mid: 4, Low: 2 |
| Operating noise | dB (A) | High: 49, Mid: 35, Low: 29 *10 |
Options
| Water Supply Connection Kit | DP-KHVW10BG |
| High-performance micro-particle filter | AFT-HVW10BG |
Built-to-order model
| Model with built-in Water Supply Connection Kit | VW-VFD10BG |
Use only tap water for this product. The direct use of well water or purified water may cause malfunction. The consumable parts of this product must be replaced regularly to ensure satisfactory operation over a long period of time. For details, please refer to the operating instructions that come with the product. The airflow will be reduced when the high-performance micro-particle filter is mounted.
*9: Be sure to use only tap water (drinking water) for this product. The settings of the product may need to be changed to suit the water quality of some regions. Also, the tap water of some regions cannot be directly used. For details, please refer to the operating instructions that come with the product.
*10: Operating noise was measured in an anechoic chamber, with measurements taken 1 meter from the front of the product, and 1 meter above the product. These values have a tendency to increase when the product is actually installed, due to surrounding noise and vibration.
*11: The continuous operating time was measured with a full water supply tank (6 liters).
*12: Approximate times at room temperature of 27C and 47% humidity.
*13: Approximate times at room temperature of 20C and 30% humidity.
